Author Topic: The Pagoda SL113 Group Firewall Pad Recreation Project (Read 130079 times)

66andBlue · « **Reply #175 on:** December 15, 2011, 05:33:56 »

Christian,
I have added you to the list - but it would really help knowing your name and address!

How about adding the information to your profile?

66andBlue · « **Reply #176 on:** December 15, 2011, 05:39:03 »

Quote from: jkosal on December 09, 2011, 22:54:55

I would like one LHD set for a 65' 230SL. I am assuming it is not too late to get my name in for the second run of pads. I have a paypal acoount. However, I am confused how I go about purchasing this item? Is this process cover in a previous reply? Thanks for the assistance

You need to add your name and address to your profile. This will allow us to send you a PayPal invoice for the order.
Thanks.

66andBlue · « **Reply #177 on:** December 15, 2011, 05:53:53 »

Good news - I have picked up the last sets today and hope to check them out over the weekend.
Expect to see PayPal invoices in your mail box soon!

Updated list:
1. Mait 1x
2. Tom 2x
3. Orion 1x
4. jetblack123 1x
5. RTenges 2x
6. David Williams 1x
7. mdsalemi
8. atlanta230sl 2x
9. labella 2x
10. holden66 1x
11. smiledoc 1x
12. quattrouser 2x
13. atlanta230sl
14. ctm14 2x
15. menesesjesse 1x
16. Gerry 1x
17. Bob G 1x
18. SilverSpear 1x
19. Circle 1x
20. shvegel 1x
21. jkosal 1x
22. MBparagon 1x
23. w113NY 1x
24. mclewis 1x
[/quote]

gtait · « **Reply #178 on:** December 15, 2011, 07:02:02 »

Hello

I have been following the forum for a while and have just come across the subject.
I am in the middle of restoring my 1964 230SL and in need a set of these firewall pads for a left hand drive. Can they still be ordered. If yes I would like a set.

I would also be interested in a set of inside firewall pads as well.

Thanks

Gil

hkollan · « **Reply #179 on:** December 15, 2011, 07:36:04 »

Hi Alfred,

I confirmed my interest for three firewall pad sets in a post in this thread on november 17, one for each of my pagodas. As well as in several PM to you directly. Still I am missing from your list. This was after we agreed thru Pm that I would wait for the second batch, since I earlier confirmed that I would take two sets.

Regards,

Hans

66andBlue · « **Reply #180 on:** December 15, 2011, 17:33:18 »

Hello Hans,
I apologize for not answering your PM again - you will get the material but I was still trying to find best way to ship.

DB280SL · « **Reply #181 on:** December 21, 2011, 14:45:04 »

I would like to order one set.

Thanks

Darrell Bennett

66andBlue · « **Reply #182 on:** December 21, 2011, 22:35:57 »

Thanks Darrell.
You'll receive a PayPal invoice soon.

w113NY · « **Reply #183 on:** December 23, 2011, 15:05:14 »

sorry Alfred, just saw this. i thought i would get an email notification for any forum responses, i have added my info to my profile and have received an invoice through paypal today. should i just proceed with the payment at this point?

cheers, christian

66andBlue · « **Reply #184 on:** December 23, 2011, 18:01:51 »

Quote from: w113NY on December 23, 2011, 15:05:14

... i thought i would get an email notification for any forum responses, ..... should i just proceed with the payment at this point?

Hello Christian,
you only get an email notification if you subscribe to the topic. Click on "Topic Tools" and you will see what you need to do.
Second, yes pay the invoice at your convenience and David Gallon will ship you the items, but most likely after the holidays, first week in the new year.

w113NY · « **Reply #185 on:** December 23, 2011, 23:18:11 »

great. done. invoice paid. thanks so much for all your help and merry christmas!

rbradley · « **Reply #186 on:** December 26, 2011, 16:13:28 »

I don't know if this is the right place to do so but I would buy a LHS set if still available. I am also interested in the
Interior pads when they become available.

Thanks and Happy New Year to all.

Montreal V8 · « **Reply #187 on:** January 03, 2012, 17:24:11 »

Hi, If not too late, I should like a LHD set. Thanks, Dale. ('71 280SL)

Richard Madison · « **Reply #188 on:** January 04, 2012, 10:03:54 »

This thread is for ordering a Firewall pad, getting info about paying, etc.

For information about installing the pad, the pro and cons of using contact cement, a step by step description by an amateur installer, photo of the installed pad, and more, look at http://www.sl113.org/forums/index.php?topic=15812.0

Richard M, NYC

twistedtree · « **Reply #189 on:** January 17, 2012, 01:28:52 »

I'd like to get two pad sets, both LHD. My contact and address info is correct in my profile.

Thanks to all who pulled this off.

Pawel66 · « **Reply #190 on:** January 19, 2012, 14:47:19 »

Dear Alfred,

If it is still possible, I also would be interested in an LHD set (280SL, 1970). I followed your earlier suggestion to go through the German connection, but I am not sure how responsive they would be or even if they did get any sets from you (their site is, in essence, being built). I will add/send necessary details upon your kind confirmation on availability.

Best regards,
Pawel

Pawel66 · « **Reply #191 on:** January 23, 2012, 09:16:57 »

Alfred, looks like the European connection you suggested worked - Mehmed knew of one piece and I am in touch with another colleague to get the pad. I hope it works. I would likestill to be in for the inside and trunk pieces, if possible....

Regards, Pawel

Sigman · « **Reply #192 on:** January 27, 2012, 04:45:46 »

I just saw this... I would love to order one if still available... My original firewall is still in good shape but would love to keep a replacement handy...

Hope it's not too late...

66andBlue · « **Reply #193 on:** January 27, 2012, 17:01:56 »

Hi Michael,
no, it is not too late.

Watch out for a PayPal invoice in your mail box.

lamakdaddy · « **Reply #194 on:** February 06, 2012, 20:54:40 »

Hi

I would like a LHD Firewall pad for my 69 280SL Manual car.

Thanks

66andBlue · « **Reply #195 on:** February 09, 2012, 23:54:07 »

Hello,
please add your name and address in your profile so that we know where to send it.
Thanks!

Pawel66 · « **Reply #196 on:** February 10, 2012, 07:53:13 »

I got mine through the European channel, just arrived, thank you!

Tom Colitt · « **Reply #197 on:** March 15, 2012, 23:12:36 »

Quote from: DaveB on November 26, 2011, 22:45:31

Here's a photo from the April 1965 edition of Australian Sports Car World showing the firewall pad disintegrating on an almost brand new 230sl. No hope of an original 230sl pad surviving.

That's a nice picture Dave. I wish I could get a high resolution copy of it. Keep in mind that there were at least three different versions of the honeycomb firewall paddings used by MB. The early one you show had a thick backing, often referred to as Coco mat, Jute, Hemp, fiber, that did not provide a good support for the thin shell that was actually the heat resistant/ flame resistant portion of the pad. I believe this is why MB changed the material slightly in subsequent 250SL, 280SL cars and used a stronger "bitumen" layer and a thin 3mm foam backing instead. The foam disintegrated after many years of use as well, but at least the rest of the pad was quite durable and stayed intact on many cars....

68_white · « **Reply #198 on:** March 17, 2012, 23:57:46 »

Is it too late to order two LHD sets?
Thanks

perry113 · « **Reply #199 on:** April 06, 2012, 15:31:18 »

I need a firewall pad for my 63 220seb coupe.
Can you furnish me with a firewall pad or supply with enough material so I can make one?
Please advise as I need one asap.
Peter

News:

Author Topic: The Pagoda SL113 Group Firewall Pad Recreation Project (Read 130079 times)

DB280SL

w113NY

w113NY

Montreal V8

lamakdaddy

Tom Colitt