Pagoda SL Group
W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: dseretakis on January 05, 2011, 08:28:40
-
I'm going to be replacing the steel brake line which is strapped to the right rear axle. I don't want to use a hose clamp as this is not correct. Does anyone know if these steel straps are still available?
-
If it is the one with the cotter key looking strap I think they are still available. I have seen them on eBay occasionally. The kits had various sizes and were about $75 the last time I saw them. It looked like enough to do a complete car.
-
Thanks. I think I found it at the local dealership. You have to buy a length of strap and then the clamp part. I'll confirm tomorrow when I pick it up.
-
Hello,
Review this information in our tech manual http://www.sl113.org/wiki/Engine/HosesClamps
Yes, you can order them from a variety of sources.
-
Hello,
Review this information in our tech manual http://www.sl113.org/wiki/Engine/HosesClamps
Yes, you can order them from a variety of sources.
Thanks, that was very informative. I think I ordered the correct parts from the dealer today. The moment of truth will be tomorrow. I may be going overboard here for a non - show car but I just feel bad using the incorrect hose clamps.