Pagoda SL Group
W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: Ron on July 17, 2012, 08:34:25
-
Hi, I'm wondering if I put my power steering pump valve back correctly. Steering requires a lot of effort at low rpms. Maybe the valve is in backwards?
The valve parts sprang out when I pulled the pin on the small round cover. But I think it goes back this way: first spring, second: valve with nut closest to pin on cover, and then cover with pin towards valve. Did I get that correct?
If I have it correct, the problem must be a slipping belt.
Ron