Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: samisabsabi on September 05, 2017, 16:58:37

Title: Detailed instruction for injection pump rebuild PES6LK70B120R22
Post by: samisabsabi on September 05, 2017, 16:58:37

Please advice how to fix the correct plungers direction in my injection pump! PES6LK70B120R22   for 280 SE , M130 , 1971.   I appreciate if any body can give me a link with details how to rebuild this pump!

Title: Re: Detailed instruction for injection pump rebuild
Post by: Rolf-Dieter ✝︎ on September 05, 2017, 20:15:02

Sami,

Did you have a look here?

---> https://www.sl113.org/wiki/Fuel/Injection

Dieter

Title: Re: Detailed instruction for injection pump rebuild
Post by: samisabsabi on September 05, 2017, 21:53:27

Quote from: Rolf-Dieter on September 05, 2017, 20:15:02

Sami,

Did you have a look here?

---> https://www.sl113.org/wiki/Fuel/Injection

Dieter

Rolf-Dieter

Yes! I was watching
Unfortunately, there is no information on this page.

Title: Re: Detailed instruction for injection pump rebuild PES6LK70B120R22
Post by: Rolf-Dieter ✝︎ on September 06, 2017, 03:12:01

Sami,

There is properly no step by step instruction that you can find here, however, many of our Members have devoted much time to post information to help indeviduals like yourself. I cannot agreee with you that there is no information to be found.

If you go to the very bottom of the page on the link I provided above you will find a link to earlier discussions by members on the subject. One just needs to spend some time reading.

Also if you cast your eyes above you will see the following "Menu Items" of our site...

Home   Help   Technical Manual   Search   Admin .... and so fort

If you click on "Search" and then enter "Injection"

you would get this page ===> https://www.sl113.org/forums/index.php?action=search2

If you read thru this page you will find helpful tips and photographs that may help you.

Good luck