Pagoda SL Group

W113 Pagoda SL Group => General Discussion => Topic started by: Shvegel on June 16, 2018, 21:29:53

Title: Voltage Regulator mount?
Post by: Shvegel on June 16, 2018, 21:29:53

Can anyone tell me what retains the voltage regulator to the inner fender.  It looks like a screw and a 6mm bolt but is there a backing plate inside the wheelwell or does it just have nuts on the inside of the wheelwell?  pictures would be really helpfull.

Trying to reassemble a car that I didn't take apart and sometimes the little details just don't make sense.

Title: Re: Voltage Regulator mount?
Post by: mbzse on June 16, 2018, 21:34:47

Two M6 hex head screws, spring washers and M6 nuts std height fasten the voltage regulator.
No strengthening plate fitted. Nuts go on the wheel well side

Title: Re: Voltage Regulator mount?
Post by: Pawel66 on June 16, 2018, 21:36:11

In other words: no bracket there.

Title: Re: Voltage Regulator mount?
Post by: Shvegel on June 17, 2018, 16:21:26

Thanks!  That means I am not missing anything!