Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: Yooks on January 27, 2020, 14:33:19

Title: W113 propshaft compaibilaty
Post by: Yooks on January 27, 2020, 14:33:19

Hi all, I recently bought a project w113 doer-upper. It came with no propshaft. Upon my worldwide search for one, several people had suggested that some w111 prop-shafts would be compatible. Would anyone have some more clarity on that for me please.

Title: Re: W113 propshaft compaibilaty
Post by: 114015 on January 27, 2020, 15:13:17

That's correct.
Needs to be shortened though.
 8)

Title: Re: W113 propshaft compaibilaty
Post by: Yooks on January 27, 2020, 16:24:53

thank you ;)

Title: Re: W113 propshaft compaibilaty
Post by: 450sl on January 27, 2020, 17:33:32

And balanced

Title: Re: W113 propshaft compaibilaty
Post by: Raymond on February 01, 2020, 03:24:29

As I understand it almost every model in the era shared the same back section of the driveshaft. The forward section length varied depending on the distance from there to the transmission in each model. 
In case you should need to know, the hex nuts where the sections thread together are 42 and 46 mm. 

Title: Re: W113 propshaft compaibilaty
Post by: sandcrab59 on February 16, 2020, 22:43:06

Try Sam In Wisconsin.
Eurocars@itis.com
or
EurocarsPartz.com
He might have the front driveshaft you are looking for .
Also the rear shaft.
I purchased a complete driveshaft a few years ago.
Tom