Pagoda SL Group

W113 Pagoda SL Group => General Discussion => Topic started by: jeffc280sl on April 17, 2005, 14:58:56

Title: low temp switch
Post by: jeffc280sl on April 17, 2005, 14:58:56

Finally decided to take the old switch off the car.  It's located in the side of the engine block just beneath the FIP.  It's made by VDO and labled 17C +2C-3C.  It's part of the ignition system.  Does anyone know the part number for this item?

Many Thanks!

Jeff C.
1970 280SL 4-speed

Title: Re: low temp switch
Post by: rwmastel on April 17, 2005, 16:20:41

Jeff,
What system is this switch a part of, or what does it do?

Rodd
Powell, Ohio, USA
1966 230SL, Euro, Auto, Leather, both  tops
1994 E420

Title: Re: low temp switch
Post by: jeffc280sl on April 17, 2005, 16:44:27

Hi Rodd,

The switch is part of the ignition system.  If the engine temperature is below 17C the switch is closed.  In the closed position this switch causes the two way valve to remove vacumm pressure to the distributor causing the timing to advance with a pickup in idle speed.  As the engine warms the switch opens and the two way valve returns vacumm to the distributor advance.  I would say it works with the FIP thermostat to increase idle when cold and possibly reduce exhaust emissions.

Jeff C.
1970 280SL 4-speed