Pagoda SL Group

W113 Pagoda SL Group => Electrical and Instruments => Topic started by: LindesayOne on April 24, 2025, 17:26:59

Title: Thermo Time Switch Wiring
Post by: LindesayOne on April 24, 2025, 17:26:59

Hello Folks,
When fixing the Thermo Time Switch wire connectors, I neglected to note which wire is connected to which terminal.
There is a pink wire, a pink/blue wire, and a large and a small terminal.
If someone can enlighten me as to which wire goes where, it would be much appreciated. It would save me the need to undertake a crash course in reading wiring diagrams.

John

Title: Re: Thermo Time Switch Wiring
Post by: WRe on April 24, 2025, 18:04:31

https://www.sl113.org/wiki/Engine/ThermoTimeSwitch

Title: Re: Thermo Time Switch Wiring
Post by: LindesayOne on April 24, 2025, 18:40:40

Wre...thanks for your prompt reply.

I am familiar with the comprehensive description of the switch on the forum; however, it doesn't tell me which wire goes where.
In the diagram, I assume that the "G" terminal is the ground, but, for the connection, I need to know which of the two wires is the ground wire.

Or, in my ignorance, am I missing something?

Title: Re: Thermo Time Switch Wiring
Post by: BobH on April 24, 2025, 18:47:37

Hello

Large terminal W - pink wire
Small terminal G - pink/blue wire

Title: Re: Thermo Time Switch Wiring
Post by: LindesayOne on April 24, 2025, 19:30:39

As usual, Bob H to the rescue!

Thanks

Title: Re: Thermo Time Switch Wiring
Post by: WRe on April 24, 2025, 19:55:09

It's all in Tech Man.

Title: Re: Thermo Time Switch Wiring
Post by: LindesayOne on April 24, 2025, 20:46:37

Oops! Missed that.

Thanks anyway, WRe.

John

Title: Re: Thermo Time Switch Wiring
Post by: BobH on April 25, 2025, 14:02:47

Hello Gents, i only added the wire colours to the manual last night after my post, i was surprised they weren't already in there