Pagoda SL Group
W113 Pagoda SL Group => Electrical and Instruments => Topic started by: Paul99 on April 27, 2025, 08:51:11
-
So (see photo) the points should be closed (ie touching) when cold and ignition off - correct? then should open when cranking etc.
Mine had a large gap when cold. I have adjusted so they JUST touch when cold.. Is that correct? couldn't find the link on the technical manual.
Many thanks
-
Hello Paul, that's correct, contacts are normally closed, open when cranking after the coil has heated up after one second
Test procedures are on here:
https://www.sl113.org/wiki/Engine/TimeSwitch
-
Great. Many thanks.