Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: JPMOSE on March 05, 2008, 14:21:07

Title: Need Source for Correct Air Intake Hose Clamp
Post by: JPMOSE on March 05, 2008, 14:21:07

Hello,

I just received all of my Norma clamps from Pete Lester.  Additionally, I obtained the Beru wind clamps and the large expansion tank clamps from the MB dealer.  The only ones left I need are the large intake hose clamps (2 each) between the air filter and venturi.  The original part number N900269 085100 rolled to N916026 080000. Both are NLA!  The Mercedes EPC rolls to a "loom tie" which is plastic.  I want the original style clamp.  Kevin at Miller's had a 100mm clamp but it was the worm type.

Does anyone have a source for original style?  If I have to, I will have mine replated (or dipped).  Thanks for your help.

Best Regards,

J. P. Mose
1968 250SL
1987 560SL

Title: Re: Need Source for Correct Air Intake Hose Clamp
Post by: zoegrlh on March 05, 2008, 20:25:37

MB has the clamps.  I bought some last summer along with new OE intake hose.  They are made in Germany for MB by GEMI and are ss.  Part number stamped on clamps along with MB Star and ring is N15003.  They are as the originals nut and bolt.  If you need further info about these clamps, I will try to find my invoice for total parts number.
Bob

Robert Hyatt
Williamsburg, VA.

1970 280SL, Red on Silver,4-speed, Euro spec; 1999 C230 Kompresser Sport, Black on Black; 1990 Miata, Black on Red, 5 Speed

Title: Re: Need Source for Correct Air Intake Hose Clamp
Post by: JPMOSE on March 06, 2008, 06:03:46

Thanks Robert...that's exactly what I needed!

Best Regards,

J. P. Mose
1968 250SL
1987 560SL

Title: Re: Need Source for Correct Air Intake Hose Clamp
Post by: JPMOSE on March 06, 2008, 07:20:11

Robert's part number below is the Gemi part number.  The MB part number is: 120-995-04-01.  This is a Gemi clamp with the MB star.

Title: Re: Need Source for Correct Air Intake Hose Clamp
Post by: J. Huber on March 06, 2008, 08:54:59

What would a pair cost from MB?

James
63 230SL

Title: Re: Need Source for Correct Air Intake Hose Clamp
Post by: psmith on March 07, 2008, 00:22:44

http://eagleday.stores.yahoo.net/normaclamps.html

Pete S.

Title: Re: Need Source for Correct Air Intake Hose Clamp
Post by: JPMOSE on March 20, 2008, 13:45:07

They listed just under $6 each from the dealer.  Wholesale obviously would be cheaper.

Best Regards,

J. P. Mose
1968 250SL
1987 560SL