Author Topic: how to set timing and dwell  (Read 3328 times)

olaf

  • Guest
how to set timing and dwell
« on: April 07, 2009, 18:02:42 »
Greetings.
I have been searching through the site and cant find a place that explains how to set the timing and dwell.
I am sorry but I am new to this so i need alittle step by step instructions before i start walking.
my car is a 1970 280 SL manual with pertronix ignition.

thanks for all help.

Peter van Es

  • Honorary Member
  • Platinum
  • ******
  • Netherlands, North Holland, Nederhorst Den Berg
  • Posts: 4076
Re: how to set timing and dwell
« Reply #1 on: April 07, 2009, 21:04:14 »
Look here for Timing and Dwell (Technical Manual): http://www.sl113.org/wiki/Electrical/Points

There's much more info for electronic ignitions, distributors etc. Just look around the Technical Manual or use the Search function (top right of the Forum).

Peter
1970 280SL. System Admin of the site. Please do not mail or PM me questions on Pagoda's... I'm not likely to know the answer.  Please post on the forum instead!

olaf

  • Guest
Re: how to set timing and dwell
« Reply #2 on: April 08, 2009, 03:01:47 »
thanks for that info.
my compression is 190 on all cylinders.
should my settings be different then?
anyone have any experience with settings for higher compression motors?