Author Topic: Door Handle Replacement  (Read 3043 times)

n/a

  • Guest
Door Handle Replacement
« on: January 18, 2004, 17:51:32 »
I have managed to source a replacement door handle with a barrel to fit the original key.  DOes anyone have any experience with fitting one?  I've done it on previous cars and it is quite easy, but I've never previously owned a car with quite such a solid door as the Pagoda so wondered if there were any tricks to knwo before I started.

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: Door Handle Replacement
« Reply #1 on: January 18, 2004, 19:58:11 »
Hello John,
The door handles can be removed without taking the door panel off. Open the door and remove the bolt on the door end, which locks the door handle on. It is either a phillips or 5m allen. Push the door handle forward and it can be removed. You will see that the door handle cylinder will come out in a fairly logical manner when the snap ring is removed. These early "single cut key" door handles are the same as on Mercedes Fintail sedans.

Joe Alexander
Blacklick, Ohio
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

Naj ✝︎

  • Associate Member
  • Platinum
  • ******
  • United Kingdom, Surrey, New Malden
  • Posts: 3163
Re: Door Handle Replacement
« Reply #2 on: January 19, 2004, 04:56:40 »
Talking about door handles, the other day I was able to buy a complete lock set for a late 113. i.e Ignition switch barrel,Two door handles, I trunk lock, glove box lock and a fuel tank cap all using one key!
Question? Will the door handles, trunk lock and glove box lock fit a 230?
OR
Will the ignition switch barrel fit an early 280 steeering lock?? (Rubber top type key)

Anybody know?

naj

65 230SL
68 280SL
68 280SL