Spare wheel support

[Larry & Norma]

Does anyone have a dimensional drawing of the spare wheel support in the boot(trunk). Mine has been converted to take an alloy wheel and i need to convert it back to take a steel wheel. Thanks

[Naj ✝︎]

Can you post a picture of it?

Might do a swap...

naj

[Larry & Norma]

Hi Naj. Here is the photo's. The support has been cut and welded and the position in the boot changed perhaps? It is a very solid mounting.

Larry

[Larry & Norma]

Naj, I guess you are not interested in swapping the support. Maybe you could post some pictures so that i can get an idea of how to
return mine to standard. (Or indeed any one who has photo's) Thanks
Larry

[Naj ✝︎]

Hello, Larry,

Cannot decide whether to change to alloys or stay with steel wheels  

Here's a pic.
Maybe you can work out the height considering the depth of the wheel chock.
Unable to measure one at the present time...

naj

[waqas]

I have the bundt-cake alloys on my '66 250SE/coupe. I chose to keep the spare on the steel wheel for this exact reason. The spare is only used occasionally, and if I get a flat, I wouldn't keep it on for long, so the 'strange' look with three alloys and one green steel rim would never last for too long.

[Larry & Norma]

I would still like some more photos of a standard support at different angles so that i can work out how to un-modify the post. Anyone help?