Author Topic: 622 option code?  (Read 6011 times)

waqas

  • Full Member
  • Platinum
  • ******
  • USA, TX, Austin
  • Posts: 1738
622 option code?
« on: May 12, 2008, 21:39:13 »
The note from the classic center simply says "622  version for Great Britain". Does anyone know what this means?

The reason I'm confused is that my car is left-hand drive (chassis numbers all match). In addition, the dealer code is 212 (Berlin).

Why would it have the "version for Great Britain" option code?

Unfortunately, I don't have the original data-card, only the annotated faxed copy from the classic center.

Waqas in Austin, Texas
Waqas (Wa-kaas) in Austin, Texas

waqas

  • Full Member
  • Platinum
  • ******
  • USA, TX, Austin
  • Posts: 1738
Re: 622 option code?
« Reply #1 on: May 12, 2008, 23:04:07 »
Ok, I have more data. The following was found on the website http://www.bekkoame.ne.jp/~mtor/mbcodedsc.html

...
622           from 01.10.1962  to 28.02.1967     D-SIGN
622           from 01.03.1967  to 31.01.1977     VERSION FOR GREAT-BRITAIN
...

Since my car is a 1965 model, my particular option is actually "D-SIGN", whatever that means.

Waqas in Austin, Texas
Waqas (Wa-kaas) in Austin, Texas

Peter van Es

  • Honorary Member
  • Platinum
  • ******
  • Netherlands, North Holland, Nederhorst Den Berg
  • Posts: 4070
Re: 622 option code?
« Reply #2 on: May 13, 2008, 01:44:02 »
quote:
Originally posted by waqas

Since my car is a 1965 model, my particular option is actually "D-SIGN", whatever that means.



Probably that there was an oval, white sticker with "D" on the back of your car. This is the normal European country denomination, needed when crossing borders.



Peter

1970 280SL. Also known as 'admin@sl113.org' and organiser of the Technical Manual.
1970 280SL. System Admin of the site. Please do not mail or PM me questions on Pagoda's... I'm not likely to know the answer.  Please post on the forum instead!

mbzse

  • Full Member
  • Platinum
  • ******
  • Sweden, Stockholm, Stockholm
  • Posts: 1748
Re: 622 option code?
« Reply #3 on: May 13, 2008, 06:24:23 »
quote:
Originally posted by vanesp

Probably that there was an oval, white sticker with "D" on the back of your car. This is the normal European country denomination, needed when crossing borders

There were indeed stickers, supposed to be attached to the right corner of the trunk (boot) lid, above the filler cap.

However, this was Germany/Mercedes in the sixties, remember - solid it must be  8)
The factory mounted "D" sign was thus a metal plate, oval in shape. It was mounted centrally on the lower part of the rear body of the W113,
 below the line between the (rear) chrome bumpers.
This info is from factory SA instruction 88/1, dated Feb 1966.
Update:Managed to find a photo with the metal "D" sign:

/Hans in Sweden

« Last Edit: May 13, 2008, 14:43:18 by mbzse »
/Hans S

waqas

  • Full Member
  • Platinum
  • ******
  • USA, TX, Austin
  • Posts: 1738
Re: 622 option code?
« Reply #4 on: May 13, 2008, 11:13:00 »
Thanks Peter and Hans!  That makes a whole lot more sense now...

Are these original metal plates still available anywhere?

Waqas in Austin, Texas
Waqas (Wa-kaas) in Austin, Texas

mbzse

  • Full Member
  • Platinum
  • ******
  • Sweden, Stockholm, Stockholm
  • Posts: 1748
Re: 622 option code?
« Reply #5 on: May 13, 2008, 11:34:58 »
quote:
Originally posted by waqas

Thanks Peter and Hans!  That makes a whole lot more sense now...
Are these original metal plates still available anywhere?

"D" Metal plates at the time of W113 production were flat steel with a pressed-in edge around, see pic below. Yes, one can find these at auto markets in Europe

/Hans in Sweden
« Last Edit: May 13, 2008, 16:26:38 by mbzse »
/Hans S

waqas

  • Full Member
  • Platinum
  • ******
  • USA, TX, Austin
  • Posts: 1738
Re: 622 option code?
« Reply #6 on: May 13, 2008, 11:59:02 »
Well, that solves the final mystery on my data card. Now I just need to figure out why the previous owner replaced the engine and swapped the rear axle for that of a fintail.... (I reverted to an original 230sl axle a few years ago).

Are you out there somewhere engine #008477 and rear axle #010184 ???  :(

Waqas in Austin, Texas
« Last Edit: May 13, 2008, 16:07:45 by waqas »
Waqas (Wa-kaas) in Austin, Texas

CraigS

  • Guest
Re: 622 option code?
« Reply #7 on: May 19, 2008, 07:23:53 »
« Last Edit: May 19, 2008, 07:24:28 by CraigS »

AGT

  • Full Member
  • Senior
  • ***
  • Scotland, Midlothian, Edinburgh
  • Posts: 192
Re: 622 option code/"D" sign
« Reply #8 on: May 14, 2010, 13:32:58 »
In anticipation of The European Event I would like to attach a solid "GB" plate below my car's rear number plate in the style of the "D" plate in the photograph in Hans' post.

I have found a solid oval "GB" plate with dimensions 139mm x 92mm. Does anyone have the country plate as pictured or know the dimensions? Also, would anyone be able to post a picture of the fixings?

Regards
Andrew
1966 230SL
Andrew

1966 230SL