Author Topic: Proper gap between hard top and body?  (Read 5264 times)

Jim Donati

  • Guest
Proper gap between hard top and body?
« on: January 09, 2011, 01:26:10 »
Can anyone tell me how much space should be between the rear lip of the hard top and the body of the vehicle?

 I have just set my newly repainted and restored hard top on my 1970 280SL and it just looks like it is sitting higher than I remember before. 

I had all the rubbers and seals replaced with all MB OEM parts from the Classic Center.  The fit seems nice and I was able to lock it down front and rear with minimal force.  But there is at least .25 inch (6.5mm) space between the rear most chrome lip and the body of the car.  This gap is even wider at the two rear corners as you can see by the picture I have attached.

Is this OK, will the rubber seals settle down and allow the gap to lessen, or is my memory of the pre-restoration gap wrong?

Thanks for any input anyone can share.

Jim

DaveB

  • Full Member
  • Gold
  • *****
  • Australia, Western Australia, Lathlain
  • Posts: 953
Re: Proper gap between hard top and body?
« Reply #1 on: January 09, 2011, 02:18:19 »
Looks normal to me. Same as mine anyway.
DaveB
'65 US 230sl 4-speed, DB190

thelews

  • Associate Member
  • Platinum
  • ******
  • USA, WI, Mequon
  • Posts: 1955
Re: Proper gap between hard top and body?
« Reply #2 on: January 09, 2011, 15:24:43 »
I think your key is holding it up.

If it's sealed and you have no trouble latching the corners, I'd not worry.
Enjoy some pictures at this link:
http://www.flickr.com/photos/8292359@N06/sets/72157603240571101/show/

John - Wisconsin
1967 Early 250 SL Red/Caviar, Manual #1543
1961 190 SL 23K miles
1964 Porsche 356
1970 Porsche 911E
1991 BMW 318is
1966 Jaguar XKE
1971 Alfa Romeo GTV 1750

mbz.280sl

  • Associate Member
  • Senior
  • ***
  • USA, MA, Cape Cod
  • Posts: 101
Re: Proper gap between hard top and body?
« Reply #3 on: January 09, 2011, 15:43:02 »
I was wondering the same myself.
I had my hardtop redone with all new weatherstripping and it sits high just like yours.
Before the new seals it definitely sat lower.
I don't have the hardtop on so I'm not concerned about it.
Otto
1969 280SL, 4 speed manual, AC,  Sand Beige

Jim Donati

  • Guest
Re: Proper gap between hard top and body?
« Reply #4 on: January 09, 2011, 16:58:01 »
DaveB, John and Otto:
Thanks guys for your thoughts, I feel more comfortable now knowing that others are the same as mine.  I will leave the hard top on for the next 3 or 4 months over the winter and then I will remove it for another year. 

Jim

Iconic

  • Full Member
  • Platinum
  • ******
  • USA, IL, Highland Park
  • Posts: 1203
  • ex-Membership Administrator
Re: Proper gap between hard top and body?
« Reply #5 on: January 09, 2011, 22:35:55 »
Jim,
FYI: Mine sits up as much or more than that and my seals are NOT new. So, you might not get much settling.
Anybody else have old seals (at least I believe mine to be old) and still have the large gap?
1970 280 SL Automatic, USA version, Grey-Blue (906G/906G), Blue leather (245)
1968 SS396 Camaro Convertible (owned since 1977 -- my first car :D)
1984 Porsche Euro Carrera coupe, LSD, SlateBlueMet/Blue
1998 BMW M-Rdstr Estoril Blue
1970 280 SL Automatic, Anthracite Grey-173G, Red Interior-132 - sold

dtuttle123

  • Guest
Re: Proper gap between hard top and body?
« Reply #6 on: January 09, 2011, 23:50:13 »
Yes, I too have old seals and a large gap!  I was just thinking about getting new seals!

J. Huber

  • Full Member
  • Platinum
  • ******
  • USA, CA, Cedar Ridge
  • Posts: 3061
Re: Proper gap between hard top and body?
« Reply #7 on: January 10, 2011, 00:04:29 »
One of the nice things about the gap is that, if you have a hoist, the padded "clasps" can be placed easily as you prepare for lift off.  If I remember correctly mine has a decent gap as well (older seals). This winter I am enjoying the look of my soft-top. May or may not sport the hardtop before spring...

PS that key shot makes me nervous!
James
63 230SL

Jim Donati

  • Guest
Re: Proper gap between hard top and body?
« Reply #8 on: January 10, 2011, 01:12:29 »
James:
I carefully placed the key in the gap for reference.  There is absolutely no weight or pressure on the key.  but I reached for something in my immediate possession and found my key, I assumed everyone could relate to it's relative size.
Thanks for being concerned.  8)
Jim