Author Topic: Rear panels  (Read 4087 times)

Dutch Pagode

  • Guest
Rear panels
« on: February 16, 2011, 13:46:43 »
Hello,

Does somebody know how the rear panels in the corners
have to be fixed?

With screws and how many and in which spot?

Thanks for reading!!

Henri

230 SL 1964

zoegrlh

  • Full Member
  • Gold
  • *****
  • USA, VA, Williamsburg
  • Posts: 808
  • Beauty from top BCW
Re: Rear panels
« Reply #1 on: February 16, 2011, 14:03:21 »
Do you mean the panels in the trunk on L & R sides?  Or do you mean the panels that are covered in leather/MB-Tex, on L & R side behind the doors, that transition to the carpet?
Bob
Robert Hyatt
Williamsburg, VA.

W113, 1970 280SL, Red leather 242 on Silver Gray Met. 180, 4-speed stick, Euro spec, restored
R172 2012 SLK350, Black Premium leather 801 on Mars Red 590, 7-speed auto
W211, 2007 E320 Bluetec, Cashmere MB Tex 144 on Arctic White 650, 7 speed auto

Dutch Pagode

  • Guest
Re: Rear panels
« Reply #2 on: February 16, 2011, 17:43:21 »
Sorry ::) I mean the panels behind the doors covered in MB Tex!!

Henri  ;)

230SL 1964

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: Rear panels
« Reply #3 on: February 17, 2011, 00:22:31 »
Hello
I start by removing the large chrome cover at the top first. With the convertible top down you will be able to see what holds it.
You will see the obvious screws near the door on the upholstered panel. In addition there is one at the lower corners under the rear carpeted deck.  You will have to remove the deck.  If you have shoulder harnesses you will need to remove these also.
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

Dutch Pagode

  • Guest
Re: Rear panels
« Reply #4 on: February 17, 2011, 19:11:13 »
Hello Joe,

Do you have a picture perhaps? My panels have new MB Tex
and I want to place them with the screws on the right spot,because
the old ones has many holes on a lot of places,they where fit with a
lot of screws!!

Thanks,

Henri  ;)

230SL 1964