Pagoda SL Group
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
This topic
This board
Entire forum
Google
News:
Become a
Full Member
and enjoy Pagoda Notes and Pagoda World — and join our
Emergency Contact List
!
Home
Help
Technical Manual
Search
Login
Register
Pagoda SL Group
»
W113 Pagoda SL Group
»
Drive train, fuel, suspension, steering & brakes
»
rhd kickdown & accelerator connection
« previous
next »
Print
Pages: [
1
]
Author
Topic: rhd kickdown & accelerator connection (Read 3082 times)
brad
Associate Member
Junior Level
United Kingdom, England, Barrow-In-Furness
Posts: 31
rhd kickdown & accelerator connection
«
on:
March 31, 2011, 11:41:55 »
Please can some one show an image / dwg of the accelerator linkage connection when kick down switch activates, my kickdown was disconnected by the previous owner and im checking to see if any parts are missing on the accelerator pedal.
Logged
ja17
Full Member
Platinum
USA, OH, Blacklick
Posts: 7414
Re: rhd kickdown & accelerator connection
«
Reply #1 on:
March 31, 2011, 13:09:10 »
Hello Brad,
The kickdown switch is located on the floor/firewall under the accelerator pedal. It goes through the floor/firewall and the wiring and plug are hooked to the other end in the lower engine compartment.
Logged
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback
brad
Associate Member
Junior Level
United Kingdom, England, Barrow-In-Furness
Posts: 31
Re: rhd kickdown & accelerator connection
«
Reply #2 on:
March 31, 2011, 15:41:42 »
it looks like something is missing on the RHD pedal at back near the top to press on my RHD kickdown switch, which is located inside the footwell behind the pedal as is the wiring connection
Logged
stickandrudderman
Vendor
Platinum
United Kingdom, England, Richmond
Posts: 2924
Re: rhd kickdown & accelerator connection
«
Reply #3 on:
March 31, 2011, 21:34:38 »
It's not uncommon to find that the wrong (too short) pedal is installed and so it fails to meet the switch.
The top of the pedal should simply hit a rocker switch and deflect it.
Logged
Stick
www.colinferns.com
Print
Pages: [
1
]
« previous
next »
Pagoda SL Group
»
W113 Pagoda SL Group
»
Drive train, fuel, suspension, steering & brakes
»
rhd kickdown & accelerator connection