Author Topic: exhaust system  (Read 4271 times)

Ferrolanoman

  • Full Member
  • Senior
  • ***
  • USA, CO, Longmont
  • Posts: 100
exhaust system
« on: June 29, 2011, 08:42:41 »
I need to replace my exhaust system from the resonator back (my front pipes seem ok). What are my options? Stainless? Buy it from among current advertisers/sponsors and do it myself (I have a lift in my garage)? Take my 280 SL to a local muffler shop and have them build a system?
Any and all recommendations from experience would be much appreciated, including preferred suppliers.
Ricardo

66andBlue

  • Full Member
  • Platinum
  • ******
  • USA, CA, Solana Beach
  • Posts: 4733
Re: exhaust system
« Reply #1 on: June 29, 2011, 16:28:37 »
Ricardo,
be careful buying an aftermarket resonator. Some are symmetrical and will not fit.
See this topic: http://www.sl113.org/forums/index.php?topic=14248.msg97089.
Also do not forget to add the heat shields otherwise the rubber hangers (donuts) will not last for long!
Alfred
1964 230SL manual 4-speed 568H signal red
1966 230SL automatic 334G light blue (sold)
1968 280SL automatic (now 904G midnight blue)

dakman29

  • Full Member
  • Senior
  • ***
  • USA, WA, Spokane
  • Posts: 179
Re: exhaust system
« Reply #2 on: June 29, 2011, 17:29:31 »
Not to hijack this thread, but I have a related question.  I had a complete Time Valve stainless system installed on my 68 280sl.  Before buying the system (thanks Mark P) I had also purchased a Borla aftermarket rear muffler that I have never installed.  My question is, can I install the rear muffler  on the stainless system, and if I do will the exhaust note change to any appreciable degree? Thanks for any thoughts or comments.

IXLR8

  • Guest
Re: exhaust system
« Reply #3 on: June 29, 2011, 18:42:24 »
Hi--

K&K offers a great stainless system that is well made, fits easily and perfectly. Their price is coimpetitive.


Joe

Ferrolanoman

  • Full Member
  • Senior
  • ***
  • USA, CO, Longmont
  • Posts: 100
Re: exhaust system
« Reply #4 on: June 29, 2011, 21:18:56 »
Joe,
please tell us who is K&K. The only complete system I've found is at BUDS BENZ--north of $850.

IXLR8

  • Guest
Re: exhaust system
« Reply #5 on: June 29, 2011, 22:49:46 »
Hi--

K&K is a recommended supplier: http://www.kkmfg.com/catalog.php


Joe

Raymond

  • Full Member
  • Platinum
  • ******
  • USA, FL, Jacksonville
  • Posts: 1204
    • GemstoneMediaInc.com
Re: exhaust system
« Reply #6 on: June 29, 2011, 23:38:52 »
The K&K folks made a presentation at the PUB (2007?) and were great.  I've dealth with them since and they couldn't have been nicer or more pleasant to deal with. 

Borla seems to make good products. The note will likely change, but better or worse will be a matter of opinon and once you get used to it, you won't likely pay any attention. 
Ray
'68 280SL 5-spd "California" Coupe