Becker Radio

[rb6667]

Getting ready to mount my Becker radio.  I have the mounting brackets that secure the radio to the dash.  What I do not have are the screws.  These screws go into the mounting tabs that are threaded.  My Question:  Anyone know what size metric screws I am looking for?

Thanks in advance.

RB6667

[Larry & Norma]

Pretty sure they are 4mm.

[114015]

Pretty sure they are 4mm.

Uhem no, cannot agree here. :'(
I think you are referring to these here RB, aren't you?

http://www.koenigs-klassik-radios.de/blenden/becker/2-x-befestigungsstreben-fuer-becker-radios/a-33100/?plentyID=a77ed320f5de3fe74f8b5512dc3ca052

These are DIN 933 (or ISO 4017) M6 x 12 (or 16) mm (= metric 6 mm diameter, 12 or 16 mm long thread), wrench size 10 mm.
Standardized norm screws.


Achim

[rb6667]

Those are the ones Achim.  Thankyou for the info.   I will look for those screws/bolts at the hardware store.  You are right about the 10mm head.  Been told that several times, but nobody knew the bolt size.

Thanks again,

RB6667 

[Larry & Norma]

Oops sorry, I just remembered that I made my own brackets using 4mm.