« previous next »
Pages: [1]

Author Topic: Fire wall insulation  (Read 2643 times)

Reischmann

  • Guest
Fire wall insulation
« on: January 31, 2013, 01:33:23 »
I am replacing the engine bay fire wall insulation.
Will regular contact cement work or should I be worried about it not holding up in the high heat?
Thank you,
Mike
1970 280SL
Logged

Richard Madison

  • Associate Member
  • Platinum
  • ******
  • USA, NY, New York
  • Posts: 1181
Re: Fire wall insulation
« Reply #1 on: January 31, 2013, 11:06:54 »
Used 3M Super Trim Adhesive (08090) and all is OK after a season of driving.

The 3M can is marked "Heat and Moisture Resistant"

Richard M, NYC
Logged
1969 280 SL, Tunis Beige, Euro Model (Italy).

Reischmann

  • Guest
Re: Fire wall insulation
« Reply #2 on: January 31, 2013, 12:19:33 »
Thank you for the quick reply.
M
Logged

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: Fire wall insulation
« Reply #3 on: February 01, 2013, 05:35:35 »
Good advice to use the correct adhesive, as some spray adhesives will eventually release when used on plastics and synthetics. The plasticisors  leach out of the plastic over time and attack the adhesive.
Logged
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback
Pages: [1]
« previous next »