« previous next »
Pages: [1]

Author Topic: Flasher for 280SL  (Read 3863 times)

Bob G ✝︎

  • Guest
Flasher for 280SL
« on: July 12, 2013, 00:49:15 »
Hi guys.
I have a question for you all who need to replace the emergency Flasher in our Pagodas.

I was told that the new design does not have pins to plug  in. When talking to the Classic
Center in Irvine,  I was told by Woody, that there is a jumper wire to plug the new one in from the old
design? Is  this information correct?
Bob Geco
« Last Edit: July 16, 2013, 09:27:22 by 280SL71 »
Logged

66andBlue

  • Full Member
  • Platinum
  • ******
  • USA, CA, Solana Beach
  • Posts: 4734
Re: Flasher for 280SL
« Reply #1 on: July 12, 2013, 16:43:00 »
Bob,
it is not a jumper wire but moving a wire from one pin to another pin.
All described here in the technical manual:
http://www.sl113.org/wiki/Electrical/FlasherRelay
Logged
Alfred
1964 230SL manual 4-speed 568H signal red
1966 230SL automatic 334G light blue (sold)
1968 280SL automatic (now 904G midnight blue)

Bob G ✝︎

  • Guest
Re: Flasher for 280SL Please send me a picture. Bob
« Reply #2 on: July 15, 2013, 16:01:05 »
I do better with pictures . What I got has a electrical tail . the replacement flasher is not the same.
I asked Woody at the classic center before I  purchase this new replacement to make sure
there is no modification needed. I will send you a picture of what I got with the part number.
Sincerely
Bob Geco
Logged

Peter van Es

  • Honorary Member
  • Platinum
  • ******
  • Netherlands, North Holland, Nederhorst Den Berg
  • Posts: 4073
Re: Flasher for 280SL
« Reply #3 on: July 16, 2013, 07:48:27 »
Bob, there is a picture at the link provided.

Peter
Logged
1970 280SL. System Admin of the site. Please do not mail or PM me questions on Pagoda's... I'm not likely to know the answer.  Please post on the forum instead!
Pages: [1]
« previous next »