« previous next »
Pages: [1]

Author Topic: Questions regarding the A/C- alternator bracket  (Read 2255 times)

ncsurfer

  • Inactive
  • Senior
  • ***
  • USA, NC, Raleigh
  • Posts: 190
  • In good company!
    • Sandhills Motoring Festival, Pinehurst, NC
Questions regarding the A/C- alternator bracket
« on: March 18, 2013, 01:24:50 »
While I have the bracket off, I was wondering if it was originally painted and if so, was it black. Mine has some black paint on it. Also, should I grease the tensioner pulley? And finally, do I need to use an anti-seize lubricant or a sealant on the bolts when I put the bracket back onto the block?
Thanks Guys......
Logged
1970 280sl Horizon blue/navy, automatic
1973 450sl Silver/red, automatic
1985 280sl red/beige, 5 speed
1995 E320 Cab. Black/Cream, Auto
2016 Porsche Boxster Spyder
2008 Porsche Boxster RS 60 Spyder
1964 MB L1113 Firetruck

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7410
Re: Questions regarding the A/C- alternator bracket
« Reply #1 on: March 19, 2013, 00:36:41 »
Use sealant on any bolt going into the engine block.  Yes the bracket was black. The idler bearing is sealed and difficult to grease.
Logged
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback
Pages: [1]
« previous next »