« previous next »
Pages: [1]

Author Topic: Rubber Seal Replacement  (Read 3968 times)

bkksl

  • Guest
Rubber Seal Replacement
« on: October 03, 2014, 06:13:33 »
I am planning to change all rubber seal on Hardtop, Doors, windows, softtops on 280SL.  On ebay I found several after markets set, however I concern that those seals may not fit very well.  Can you please advise a good source to buy high quality OEM seal? Has anyone had any problem with aftermarket seal?
Logged

jaymanek

  • Guest
Re: Rubber Seal Replacement
« Reply #1 on: October 03, 2014, 09:36:51 »
Watching this with interest.
I changed my soft top frame seal with the SLS ones. They had to be cut at the fold points.

Unless Ive done something wrong they don seem to work very well at all. My old originals were a lot better so will be reinstalling those.

The parts from Mercedes are a staggering price.
Logged

JamesL

  • Full Member
  • Platinum
  • ******
  • United Kingdom, London, London
  • Posts: 3610
Re: Rubber Seal Replacement
« Reply #2 on: October 03, 2014, 10:27:12 »
But the MB ones seem to fit...
Logged
James L
Oct69 RHD 280 in DB906 with cognac leather

UJJ

  • Full Member
  • Silver
  • ****
  • USA, CA, Grass Valley
  • Posts: 327
Re: Rubber Seal Replacement
« Reply #3 on: October 03, 2014, 12:06:44 »
Also the MB seals have a "felt" covered surface where the window touches it, plus it also is plugged close at the top.
It seems that all aftermarket seals do not have that.

Urban
Logged
Urban Janssen
Grass Valley, CA
1968 280 SL - 4speed manual
173 anthracite grey

RobSirg

  • Full Member
  • Gold
  • *****
  • Australia, Victoria, Melbourne
  • Posts: 568
Re: Rubber Seal Replacement
« Reply #4 on: October 03, 2014, 13:32:49 »
I'm also planning to buy all new rubbers also.
Felt covered on the glass is important to me so I will at least need to go original for those. ( good point Urban)

I used aftermarket ones on my doors on my first car and had to cut them to fit - which I didn't mind doing as I feared I might have needed to do that on the originals anyway. It was easy to stretch them when installing so I didn't know if it was me or a poor fit ( pretty certain it was a poor fit).

Still might buy aftermarket where not seen/ barely seen as I don't mind a little trimming to save the large cost difference. ( but will check price differential again)

Rob
Logged
1969 280SL Auto RHD 906G,  H'top 387H, Parchm't
1970 280SL Man. RHD Dark Red 542G, Bamboo MB Tex
1962 E Type Jag BRG with Tan
1974 White Alfa Spider 2000
2023 Range Rover
1982 280TE (my daily)
1967 Alfa Spider ("Duetto") Red
1977 Yellow 911 Targa
1991 Nissan Figaro
1959 190SL Black
1970 300SEL 3.5

jaymanek

  • Guest
Re: Rubber Seal Replacement
« Reply #5 on: October 06, 2014, 09:14:31 »
Actually have just ordered from MB and the seals arent expensive... The top seal still comes as one L shaped piece needing to  be cut at around £30 GBP and the vertical A pillar seal is around the same price.

Previously I had been pricing up the metal "runners" at over £150 each as the parts catalogue is as clear as mud.

Ordered, will repost back on ease of fitment.
Logged

Fdevita

  • Guest
Re: Rubber Seal Replacement
« Reply #6 on: October 06, 2014, 20:39:22 »
Just replaced all mine - bought from MC Classic Car Center - prices were reasonable - ask Thomas for MBUSA 20% discount
Logged
Pages: [1]
« previous next »