Author Topic: 230SL Rear Main Seal Replacement  (Read 3102 times)

dbenz

  • Guest
230SL Rear Main Seal Replacement
« on: August 08, 2004, 13:20:57 »
Hi,

Has anybody ever attempted to replace the rear main seal on a 230SL without removing the engine?

Just wanted to ask the question -- before I spend hours trying and then end up removing the engine after all.

Thanks -- David

Benz Dr.

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7220
  • Benz Dr.
Re: 230SL Rear Main Seal Replacement
« Reply #1 on: August 08, 2004, 22:20:16 »
Forget it. Ya'll can't get there from here.

Daniel G Caron
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: 230SL Rear Main Seal Replacement
« Reply #2 on: August 09, 2004, 05:18:16 »
Hello dbenz,
Both halves of the rope seal are pinned, so the top half (in the block) cannot be removed without first taking the crankshaft out!

Joe Alexander
Blacklick, Ohio
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback