Author Topic: Steering colum alignment  (Read 4559 times)

Madmerc

  • Guest
Steering colum alignment
« on: December 01, 2015, 02:08:03 »
Hi guys I have just noticed that my steering wheel is bent so I have replaced it with a second hand one until I find a new replace the for it but I  am curios to no whether the steering wheel is placed dead centre to the instruments

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: Steering colum alignment
« Reply #1 on: December 01, 2015, 15:24:28 »
Look for a small "slash" mark on the end of the splined steering column shaft. It should be directly upward and aligned so the two spokes on the steering wheel are level.
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

stickandrudderman

  • Vendor
  • Platinum
  • ******
  • United Kingdom, England, Richmond
  • Posts: 2926
    • http://www.colinferns.com
Re: Steering colum alignment
« Reply #2 on: December 02, 2015, 22:59:30 »
Unless it's RHD, in which case the slash should be at the 6 o'clock position.

Benz Dr.

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7220
  • Benz Dr.
Re: Steering colum alignment
« Reply #3 on: December 03, 2015, 02:15:27 »
Unless it's RHD, in which case the slash should be at the 6 o'clock position.


Really? I never would have guessed that.
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

Madmerc

  • Guest
Re: Steering colum alignment
« Reply #4 on: December 03, 2015, 06:02:43 »
thanks guys appreciated the help