« previous next »
Pages: [1]

Author Topic: spark plugs wires  (Read 2645 times)

catjim813

  • Guest
spark plugs wires
« on: July 16, 2014, 15:15:32 »
Has any one tried the Bosch plug wires being sold by auto-haus in AZ  Is this the correct plug wires for ours cars price just seems to be good value.
Logged

zoegrlh

  • Full Member
  • Gold
  • *****
  • USA, VA, Williamsburg
  • Posts: 811
  • Beauty from top BCW
Re: spark plugs wires
« Reply #1 on: July 16, 2014, 18:28:53 »
I had to purchase two Bosch wirw sets, because the #1 plug wire socket is at a 90 degree angle and is a resistor socket.  I used the #2 wire from second set to replace the #1 wire, to give it the correct look and to replace the resistor.
Bob
Logged
Robert Hyatt
Williamsburg, VA.

W113, 1970 280SL, Red leather 242 on Silver Gray Met. 180, 4-speed stick, Euro spec, restored
R172 2012 SLK350, Black Premium leather 801 on Mars Red 590, 7-speed auto
W211, 2007 E320 Bluetec, Cashmere MB Tex 144 on Arctic White 650, 7 speed auto

66andBlue

  • Full Member
  • Platinum
  • ******
  • USA, CA, Solana Beach
  • Posts: 4735
Re: spark plugs wires
« Reply #2 on: July 16, 2014, 20:42:00 »
This Bosch set: https://www.autohausaz.com/search/product.aspx?sid=a3rbmt45rn302j55rxqajt55&partnumber=09023
is a very good value but it looks like the #1 wire has a 90 degree connector on the spark plug end (it should be straight), but if you have a 280SL then the connectors on the distributor end should all be 90 degree.
Read this: http://www.sl113.org/wiki/Electrical/SparkPlugWires
Logged
Alfred
1964 230SL manual 4-speed 568H signal red
1966 230SL automatic 334G light blue (sold)
1968 280SL automatic (now 904G midnight blue)
Pages: [1]
« previous next »