Author Topic: engine running too reach  (Read 2186 times)

Daffy

  • Guest
engine running too reach
« on: September 15, 2014, 19:25:22 »
Hello,

I would like to get your advice about a problem in my 280sl pagoda 71' model. The troubleshooting occurs at the idling too reach and spark plugs black. What could be the cause?
Thank you very much.
Daffy

nahuston

  • Guest
Re: engine running too reach
« Reply #1 on: September 18, 2014, 20:44:50 »
The list of possibilities is endless. We need more info and you need to check the basics - its either getting too much fuel or too little spark. Start with a fresh tune up if the ignition system items are old before messing with any of the fuel injection stuff.

ctaylor738

  • Full Member
  • Platinum
  • ******
  • USA, VA, Falls Church
  • Posts: 1174
Re: engine running too reach
« Reply #2 on: September 19, 2014, 00:23:51 »
Good point about ignition.  If that all checks out, the usual culprit is the Warm Running Device sticking in the "cold" position.  Do a Search, possibly the most popular topic on the Forum.
Chuck Taylor
1963 230SL #00133
1970 280SL #13027 (restored and sold)
1966 230SL #15274 (sold)
1970 280SL #14076 (sold)
Falls Church VA