Author Topic: Separating the Transmission from the Engine  (Read 4291 times)

mBdrvr

  • Full Member
  • Senior
  • ***
  • USA, PA, Bethlehem
  • Posts: 169
Separating the Transmission from the Engine
« on: September 04, 2015, 22:54:18 »
I've removed the engine and trans but I can't get the trans to separate from the engine. Any tips??
Paul Greenblatt
'70 280 SL
'66 250 SE Cabrio
'60 190 SL

Benz Dr.

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7220
  • Benz Dr.
Re: Separating the Transmission from the Engine
« Reply #1 on: September 06, 2015, 01:14:20 »
Make sure all of the bolts are removed. Sometimes things will corrode together and you might need to use a bit of heat on any suspected areas to aid removal. Normally the tans will come off easily so it seems odd to me that it won't come apart.

Is this a standard or auto?
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

mBdrvr

  • Full Member
  • Senior
  • ***
  • USA, PA, Bethlehem
  • Posts: 169
Re: Separating the Transmission from the Engine
« Reply #2 on: September 07, 2015, 22:45:07 »
I missed some bolts. Thanks.
Paul Greenblatt
'70 280 SL
'66 250 SE Cabrio
'60 190 SL