« previous next »
Pages: [1]

Author Topic: wood steering wheel restoration  (Read 3165 times)

Michaelg

  • Guest
wood steering wheel restoration
« on: January 01, 2016, 22:56:27 »
I have a wood steering wheel in my 1970 280 sl that needs work. need a little guidance . can handle anything if well coached!!
Needs to be stripped, voids need to be filled and refinished with the right products.

Anybody out there had a good result doing this project?

happy new year.

Cheers.

Michaelg
Logged

Shvegel

  • Inactive
  • Platinum
  • ******
  • USA, OH, Cleveland Heights
  • Posts: 2978
Re: wood steering wheel restoration
« Reply #1 on: January 02, 2016, 01:17:59 »
Strip, sand, fill with epoxy and refinish with automotive clear.  If it is a Nardi Classic it may be easier to just buy a new one.

http://www.evasivemotorsports.com/mm5/merchant.mvc?Screen=CTGY&Category_Code=Nardi-SW
Logged

Michaelg

  • Guest
Re: wood steering wheel restoration
« Reply #2 on: January 03, 2016, 01:50:00 »
was that an option on that car??
Logged

Garry

  • Full Member
  • Platinum
  • ******
  • Australia, Victoria, Kyneton and Brisbane Queensland
  • Posts: 5236
  • Audit Committee
Re: wood steering wheel restoration
« Reply #3 on: January 03, 2016, 05:36:29 »
It would have been dealer supplied if not fitted later and not from MB.. Restore the old one as the newer Nardi’s are no where near as good as the 60’s ones.

Logged
Garry Marks
Melbourne/ Kyneton, Brisbane. Australia
1969 MB 280SL 5 speed RHD SOLD.
1965 MB 230SL Auto RHD Lt Blue 334G, Top 350H, Tourist Delivery.
1972 MB 280CE Auto RHD 906G
2005 MB A200
2006 MB B200
2019 Izuzu DMax 4x4 Slide-on camper.
2022 Volvo XC40 Electric
2024 Volvo EX30 Electric

Michaelg

  • Guest
Re: wood steering wheel restoration
« Reply #4 on: January 03, 2016, 12:15:45 »
what products would you use to restore/refinish?
Logged
Pages: [1]
« previous next »