« previous next »
Pages: [1]

Author Topic: Control Shaft Connections  (Read 3339 times)

mocstar

  • Guest
Control Shaft Connections
« on: December 03, 2015, 22:48:10 »
Hi guys,

I had to drill out the two bolts connecting the control shaft to the air intake and can't seem to find these replacement bolts anywhere. (see attached pic)

Can someone point me in the right direction?

Much appreciated,
Matt
Logged

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: Control Shaft Connections
« Reply #1 on: December 05, 2015, 03:03:54 »
Yes these are centering bolts. They have a tapper under the head to center-up linkage position exactly. Try to order them the MB Dealer or Classic center.  Otherwise find some good used ones.
Logged
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

Benz Dr.

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7220
  • Benz Dr.
Re: Control Shaft Connections
« Reply #2 on: December 05, 2015, 03:28:30 »
450SL ( and others ) manifold studs will work nicely. You will need to trim some of the threaded end off the longer portion to the correct length. 
Logged
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

mocstar

  • Guest
Re: Control Shaft Connections
« Reply #3 on: December 08, 2015, 01:35:39 »
Thanks so much for your responses. You have saved me a lot of time.

Cheers,
Matt
Logged
Pages: [1]
« previous next »