Author Topic: Heater air distributor  (Read 3077 times)

Peder

  • Inactive
  • Junior Level
  • *
  • Norway, Oslo, Oslo
  • Posts: 16
Heater air distributor
« on: April 07, 2016, 09:19:29 »
I have bought a used air distributor for the heater. There are some electrical cores at the right hand side of the box. I wander what purpose they are there for? Se picture.
Is there any who can help?

Naj ✝︎

  • Associate Member
  • Platinum
  • ******
  • United Kingdom, Surrey, New Malden
  • Posts: 3163
Re: Heater air distributor
« Reply #1 on: April 07, 2016, 13:43:21 »
Hi,

Its the connector for the glove compartment light.

naj
68 280SL

Peder

  • Inactive
  • Junior Level
  • *
  • Norway, Oslo, Oslo
  • Posts: 16
Re: Heater air distributor
« Reply #2 on: April 07, 2016, 14:47:34 »
Aha. You see, the air distributor was missing when I bougth the var. But the light in the glove box is ok anyway.
Thank for the information.

alchemist

  • Associate Member
  • Senior
  • ***
  • USA, NY, GRAND ISLAND
  • Posts: 183
Re: Heater air distributor
« Reply #3 on: April 10, 2016, 02:24:10 »
Mine has no connectors on the side of the heater housing. However, Similar connectors do exist out side the housing, on the side of the duct, with 2 electrical wires, one of which is ground and the other goes to the Glove Compartment. If your glove compartment light is working, most likely that you have the same set-up like mine. Then you just ignore the connector on the housing you bought. That means that the housing you bought is different than your original housing.