« previous next »
Pages: [1]

Author Topic: Valve Seal Tool  (Read 2308 times)

Ron500E

  • Guest
Valve Seal Tool
« on: May 13, 2016, 05:06:54 »
Does anyone have a Genuine Mercedes valve seal installation tool that they would sell, or rent?
Thanks,

Ron
Logged

stickandrudderman

  • Vendor
  • Platinum
  • ******
  • United Kingdom, England, Richmond
  • Posts: 2924
    • http://www.colinferns.com
Re: Valve Seal Tool
« Reply #1 on: May 13, 2016, 08:45:15 »
Its easy enough to get one turned up on a lathe; there's a diagram in the BBB I think.
Logged

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: Valve Seal Tool
« Reply #2 on: May 14, 2016, 07:53:41 »
You can use an old valve guide to push the seals down in place. With the intake valves, you should also use the plastic installation sleeves provided with the valve seals.
Logged
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback
Pages: [1]
« previous next »