Author Topic: 230sl cylinder head  (Read 3104 times)

srisant

  • Guest
230sl cylinder head
« on: November 02, 2016, 13:56:09 »
Hi, I have to replace my cylinder head, wondering if 220SE cylinder head will work perfectly with 230SL head? If not what will be alternative?

Regards,

Benz Dr.

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7220
  • Benz Dr.
Re: 230sl cylinder head
« Reply #1 on: November 02, 2016, 16:14:23 »
250SE/SL is your only other choice.
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: 230sl cylinder head
« Reply #2 on: November 02, 2016, 20:28:02 »
Yes, Dan is correct.  The 220SE head has no provisions for injectors. The 220SE has injectors mounted on the intake manifold.
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

srisant

  • Guest
Re: 230sl cylinder head
« Reply #3 on: November 02, 2016, 23:26:48 »
If I use 250 head is it going to impact engine performance or it will be the same?

Best,

Benz Dr.

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7220
  • Benz Dr.
Re: 230sl cylinder head
« Reply #4 on: November 03, 2016, 07:09:53 »
It might even be a bit better due to slightly higher compression ratio and larger intake valves of the 250.
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC