Author Topic: speedo body question  (Read 2996 times)

erickmarciano

  • Associate Member
  • Gold
  • *****
  • Canada, Quebec, montreal
  • Posts: 544
speedo body question
« on: November 23, 2004, 19:29:46 »
when my euro 280sl came to the USA 8 years ago , the owner replaced the km/h gauge with a mph one . since the car is now in Canada I found a use KMH one to use in my car . the body of the MPH one is like rubber and the KPH one is metal with is correct?
also when I look at the back of the speedos the whole for the cable on the mph is to the right and the KPH is to the left , with is the correct one?
thanks
Erick

1971 280sl
1962 VW
1954 Allstate vespa
1958 gs150 vespa
1962 gs160 vespa
1994 E500 W124
1971 280sl
1989 Porsche 930 coupe
1988 e30 m3
2001 ducati mh900
2006 ps1000
1962 Vespa GS160

Cees Klumper

  • Full Member
  • Platinum
  • ******
  • USA, CA, Fallbrook
  • Posts: 5700
    • http://SL113.org
Re: speedo body question
« Reply #1 on: November 24, 2004, 03:45:41 »
The case as far as I know is sort of a metal "skeleton" (i.e. not fully enclosed but more bracket-like) that is covered with a rubbery cover that does enclose the whole back of the instrument. I have not seen a full metal cover before. Since the instrument is located on the right hand side (on a left-hand drive car) I would imagine that the connection for the cable would be on the left side, when looking at the instrument from the front/face side.

Cees Klumper in Amsterdam
'69 white 280 SL automatic
Cees Klumper
1969 Mercedes 280 SL automatic
1968 Ford Mustang 302 V8
1961 Alfa Romeo Giulietta Sprint Coupe 1600
1962 FIAT 1500S OSCA convertible
1972 Lancia Fulvia Coupe 1.3
1983 Porsche 944 2.5
1990 Ford Bronco II

jeffc280sl

  • Guest
Re: speedo body question
« Reply #2 on: November 24, 2004, 07:58:37 »
Your in luck.  Just took mine out last night.  The MPH version has the soft rubber like rear cover with the cable hole facing to the right as you look at the back of the speedo.

Jeff C.
1970 280SL 4-speed

n/a

  • Guest
Re: speedo body question
« Reply #3 on: November 25, 2004, 11:05:38 »
Erick,

I do have a MPH and KPH gauge for a 280SL (LHD) and both do have the connection for the cable on the right hand side, seen from the back of the speedometer. I have both gauges out of the car, if you like to see a picture I can take one. Both do have also the rubber jacket.  
I do believe your connection on the left looks like for a right hand drive(RHD)car.

Lajos Damen
1969 280SL

erickmarciano

  • Associate Member
  • Gold
  • *****
  • Canada, Quebec, montreal
  • Posts: 544
Re: speedo body question
« Reply #4 on: November 25, 2004, 11:53:33 »
thanks Damen , I guess I have I have a rhd version ,but why would it be in KPH? and has anyone seen a metal body not rubber?
thansk

1971 280sl
1962 VW
1954 Allstate vespa
1958 gs150 vespa
1962 gs160 vespa
1994 E500 W124
1971 280sl
1989 Porsche 930 coupe
1988 e30 m3
2001 ducati mh900
2006 ps1000
1962 Vespa GS160

Benz Dr.

  • Vendor
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7219
  • Benz Dr.
Re: speedo body question
« Reply #5 on: November 25, 2004, 22:18:56 »
Early cars all have metal back covers. Somewhere in '65 they were changed. 190SL's are all metal. I think the tach is LH or RH drive.

Daniel G Caron
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC