Author Topic: Mercedes Tools - different manufacturers  (Read 4256 times)

Bonnyboy

  • Full Member
  • Gold
  • *****
  • Canada, BC, North Vancouver
  • Posts: 909
  • 1969 280sl Euro 4sp LSD
Mercedes Tools - different manufacturers
« on: May 01, 2017, 21:19:56 »
When I worked in a bicycle store at age 12 I became possessive about "my" tools and started to collect little wrenches from flea markets and garage sales finding that motorcycle tool kit wrenches were handy and cheap.   40 yrs later find that I still can't resist a good quality inexpensive wrench at a garage sale - especially if it is from Germany.   I never collected for the sale of collecting but rather to use, but as I get more and more wrenches and vintage tools I think the collecting thing is now more just for fun and the thrill of the hunt.   I started to sort through my car wrenches last night and realize I have no idea what year / make they came with.

Has anyone see a list of the manufacturers that would have produced various tools to go in various cars.   I have matador, dowidat, hazet, heyco etc.  but don't know which is correct for which year.  I also have some that say Ford, Yamaha, Fiat, Honda.   

Ian
69 280SL
65 F-100
73 CB750K
75 MGB
78 FLH
82 CB750SC
83 VF 1100C
94 FLHTCU
08 NPS50
12 Pro 4X

Jonny B

  • Pagoda SL Board
  • Platinum
  • ******
  • USA, CA, San Marcos
  • Posts: 4190
Re: Mercedes Tools - different manufacturers
« Reply #1 on: May 02, 2017, 16:28:20 »
For the Benz car the most common are Hazet, Dowidat, Walter, Matador and Heyco. The screwdrivers are Felo, I believe. The pliers I have are Hapewe. I have seen each of those in various tool kits for the Pagoda. I don't think there was a set tool for a specific year. It was whatever was available. These tools were not specific to any particular vehicle so Benz would contract with various makers to get them tools, and they would put together the various kits. The bag was the more defining item, with the higher end cars having the nice snap bags.

I am assuming that the manufacturers would just stamp on the tool whatever marque they were selling to
Jonny B
1967 250 SL Auto, DB 568
1970 280 SL Auto, DB 904
1966 Morris Mini Minor

mmizesko

  • Pagoda SL Board
  • Gold
  • *****
  • USA, OH, New Albany
  • Posts: 988
Re: Mercedes Tools - different manufacturers
« Reply #2 on: May 02, 2017, 17:05:24 »
Jon is right on about the choice of wrench manufacturers that came in the kit.  I have seen kits with just Dowidat, or Heyco.  I have not seen any Hazet open ended wrenches, but Hazet made all the spark plug wrenches and the 2760 Oil Service wrench.  Walter, to the best of my knowledge only made the 17mm/13mm after 1965 when Mercedes switched from 14mm to 13mm.  I believe that the wrenches (spanners for our friends in the UK) were in bins and randomly put into the kits.  Felo made the screwdrivers, and Heyco made the water pump pliers (Heyco 300).

Mike Mizesko
1970 280SL 291H Dark Olive

Jonny B

  • Pagoda SL Board
  • Platinum
  • ******
  • USA, CA, San Marcos
  • Posts: 4190
Re: Mercedes Tools - different manufacturers
« Reply #3 on: May 02, 2017, 22:09:58 »
Today, while trolling through ebay, saw a "UNIOR" open end wrench, with Mercedes Benz on the shank? Have never seen or heard of that one before.

It is a DIN 895, 17 mm X 14 mm
Jonny B
1967 250 SL Auto, DB 568
1970 280 SL Auto, DB 904
1966 Morris Mini Minor

TheEngineer

  • Associate Member
  • Gold
  • *****
  • USA, West Seattle, WA
  • Posts: 775
  • '69 280SL,Signal Red,
Re: Mercedes Tools - different manufacturers
« Reply #4 on: May 02, 2017, 23:24:59 »
Attached is a pic of old MB tools
'69 280SL,Signal Red, 09 cam, License BB-59U
'67 230SL, 113042-10-017463 (sld)
'50 Jaguar Roadster XK120, #670.318 (sld)
tired engineer, West-Seattle,WA

mbzse

  • Full Member
  • Platinum
  • ******
  • Sweden, Stockholm, Stockholm
  • Posts: 1748
Re: Mercedes Tools - different manufacturers
« Reply #5 on: May 02, 2017, 23:33:39 »
Quote from: Jonny B
.../... saw a "UNIOR" open end wrench.../... Have never seen or heard of that one before
Open-end wrenches from Unior were one possibility in the tool kits... However I think they were included after the Pagoda era...(?) 1980-1990´s
Manufacturer situated in Slovenia, was founded in 1919.
Some info here: http://www.uniortools.com/cgi-bin/cms.cgi?doc=10523
« Last Edit: May 03, 2017, 11:21:09 by mbzse »
/Hans S