rebuilt my slave cylinder and made an error...

[erickmarciano]

I put one of the seals in the wrong way is this important?should I open it up again and rebleed my system?

thnaks
and happy new year

1971 280sl
1962 VW
1954 Allstate vespa
1958 gs150 vespa
1962 gs160 vespa

[George Des]

Erik,
 Now I think you really know the answer. Not what you wnat to hear, but the answer is yes. The seals are cupped for a very good reason.

George Des

[erickmarciano]

yes I guess I know the awnser

thanks

1971 280sl
1962 VW
1954 Allstate vespa
1958 gs150 vespa
1962 gs160 vespa

[Benz Dr.]

The cup usually faces towards the high pressure side. It doesn't mater if you're compressing the fluid or the high pressure fluid is acting against the seals - they face the same way.
The pressure forces the seal out so it contains all the fluid without leaking.

Daniel G Caron

[erickmarciano]

for the slave cylinder I put the 2 cups facing the fluid not one facing the fluid and the other facing the clutch arm . can I leave it this way?

1971 280sl
1962 VW
1954 Allstate vespa
1958 gs150 vespa
1962 gs160 vespa

[erickmarciano]

I put   the 2 seals like this  
>> cluthc arm    
not
><  clutch arm