Author Topic: I need a part off a Junker air-suspension car...  (Read 4620 times)

scoot

  • Full Member
  • Platinum
  • ******
  • USA, CA, Altadena
  • Posts: 2355
I need a part off a Junker air-suspension car...
« on: January 12, 2018, 04:44:27 »
Has anyone got a W112 or W109 parts car? I need a part that is missing on my car. See attached pics. The metal plate and rubber buffer are not present on the left side of the rear axle, on the right side they are there but the rubber is shot. I can buy the rubber but the stupid metal plate, not sure where to get that...
Scott Allen
'67 250 SL (early)
Altadena, California

Vander

  • Full Member
  • Silver
  • ****
  • USA, OH, Columbus
  • Posts: 387
Re: I need a part off a Junker air-suspension car...
« Reply #1 on: January 12, 2018, 15:39:35 »
I have a W112 parts car, but it is a really rusty car. I am not sure of the condition of the part. I do have a brand new genuine #20 in the diagram, but I took a look at it and the plate is not part of it.
1969 280SL

scoot

  • Full Member
  • Platinum
  • ******
  • USA, CA, Altadena
  • Posts: 2355
Re: I need a part off a Junker air-suspension car...
« Reply #2 on: January 12, 2018, 15:49:06 »
I have a W112 parts car, but it is a really rusty car. I am not sure of the condition of the part. I do have a brand new genuine #20 in the diagram, but I took a look at it and the plate is not part of it.
I appreciate you looking.  The part I want is not part #20.   It's #85 and #86.

thanks
Scott
Scott Allen
'67 250 SL (early)
Altadena, California

Benz Dr.

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7220
  • Benz Dr.
Re: I need a part off a Junker air-suspension car...
« Reply #3 on: January 12, 2018, 17:56:38 »
I have a couple of air suspension cars here so that part is likely on one of them. Will have a look and report back.
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

scoot

  • Full Member
  • Platinum
  • ******
  • USA, CA, Altadena
  • Posts: 2355
Re: I need a part off a Junker air-suspension car...
« Reply #4 on: January 12, 2018, 17:57:42 »
I have a couple of air suspension cars here so that part is likely on one of them. Will have a look and report back.
Thanks Dan.  The metal piece is W112-specific, but the 109 version might work.  But it's a different part.  The rubber things are the same for both.
Scott Allen
'67 250 SL (early)
Altadena, California

Benz Dr.

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7220
  • Benz Dr.
Re: I need a part off a Junker air-suspension car...
« Reply #5 on: January 12, 2018, 20:46:41 »
 Everything on a 112 is similar but also very different than a 108. I will compare what I have to your picture.
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC