Author Topic: oil pump removal ???  (Read 1542 times)

suavemechanic

  • Guest
oil pump removal ???
« on: February 08, 2019, 00:56:31 »
Hi , really struggling to release the oil pump
(so i can check bearings and replace the rear main seal )
I have removed  the auxillary shaft
the tach drive will not come out ( fouls the head but its loose )
tried ( gentle ) heat
is there some thing im missing ???

cheers

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: oil pump removal ???
« Reply #1 on: February 08, 2019, 05:30:53 »
Try rotating slightly back and fourth while pulling upward.
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

suavemechanic

  • Guest
Re: oil pump removal ???
« Reply #2 on: February 09, 2019, 20:35:00 »
Hi , man it was tight !
first I priced a new one ......
fought its way out till the very end
it all depended on finding the correct drift
old alloy swells !
 I had flash backs to a pre war car I worked on that took days of drilling and slide hammering to get the oil pump out ....in tiny pieces (then we had to make a new one ) the owner sent his grand daughter to pick it up , I tried to explain how much work we had put into the car .... she looked at her phone and giggled a lot