Author Topic: unknown fuel part  (Read 3453 times)

jpressick

  • Inactive
  • Regular
  • **
  • USA, VA, Poquoson
  • Posts: 98
unknown fuel part
« on: May 05, 2019, 22:12:49 »
My 1967 250sl is leaking gas near the front of the gas tank.   The leak is coming from a part that is attached to the floor of the trunk and has three fuel pipes going into it and is separate from the gas tank.   I have taken the part out and apart which contains a spring about 5 inches long and 1 inch in diameter.  I don't know the name of the part but know the gasket is leaking.  I am trying to identify the part so a new gasket can be ordered.  Any help would be appreciated.

Benz Dr.

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7220
  • Benz Dr.
Re: unknown fuel part
« Reply #1 on: May 06, 2019, 05:19:44 »
That sounds like it's the brake force regulator. Your leak would be brake fluid.
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: unknown fuel part
« Reply #2 on: May 06, 2019, 07:04:30 »
Yes, sounds like a brake valve.
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

Shvegel

  • Inactive
  • Platinum
  • ******
  • USA, OH, Cleveland Heights
  • Posts: 2978
Re: unknown fuel part
« Reply #3 on: May 13, 2019, 02:36:55 »
If you took your brake force regulator apart you might want to consider sending it off to be rebuilt.  Brake parts fail when you need them the most.  I am pretty sure these guys rebuild them.

https://www.pmbperformance.com/brake-calipers.html