Clutch pedal

[450sl]

Hi All,

Wanted to change my  clutchslave cilinder and adjust my 280-70 pedal.

Seems my clutchpedal rests approx 15mm or  1/2'' higher than my brakepedal .

Can anyone confirm that this is normal? any comments?

Thanks
Mark

[Naj ✝︎]

Hi, Mark,

They sit level on my car

naj

[waltklatt]

Mark,
There should be an adjustable bolt at the junction of the clutch pedal and clutch master.
Check that out, it's not a straight bolt, but an offset type.
You will find a similar one for the brake pedal too. 
How does the brake pedal sit in relation to the gas pedal?
Walter

[450sl]

Thanks Naj and Walt, for your kind reply.


Naj , i already suspected taht pedals should be even.

Walter , i found this adjustmentbolt nr 20 , but for the required 0.2mm clearance i am at the very end of its range.


Since i can feel no excessive play on the clutchpedal pivotpoints , i suspect rubber stop no 24 .

Or has someone a better idea?

Does anyone have the partnr of this rubberstop?

Mark