Author Topic: steering gerarbox recall  (Read 2595 times)

rmmchl

  • Full Member
  • Silver
  • ****
  • USA, WV, Charleston
  • Posts: 470
steering gerarbox recall
« on: March 28, 2005, 16:23:37 »
Star told me on the phone today that everyone should have the steering knuckle replaced also when rebuilding the steering box, because they were defective. Does Dr. Benz know anything about this? Also, I'm confused even if I need a whole rebuild. I noticed some fluid leaking out of the bottom of the steering box. It has to be a seal. Star charges 450.00 for the rebuilt steering box and 275.00 for the knuckle. A place in California sells the seal kit for 35.00. Star says they replace all the ball bearings.
michael romeo           
1967  250sl
signal red

Benz Dr.

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7220
  • Benz Dr.
Re: steering gerarbox recall
« Reply #1 on: March 29, 2005, 11:22:56 »
In my best German accent,

  '' I know nothing of such things! ''

Dan Caron's
 SL Barn
benzbarn@ebtech.net
 slbarn.mbz.org
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

Mike

  • Guest
Re: steering gerarbox recall
« Reply #2 on: March 29, 2005, 16:02:25 »
I recently had my steering box repaired due to leaking power steering fluid and, in the process, my mechanic told me that the steering knuckle needed to be replaced.  I had experienced no known problems with the steering, aside from the leaking, and I noticed no change after the replacement of the knuckle.  The steering box no longer leaks though.

Michael L. Hund

knirk

  • Guest
Re: steering gerarbox recall
« Reply #3 on: March 30, 2005, 03:44:32 »
I had oil leaking from the bottom of the steering box. Took it out and changed the seals only in the bottom cover around the main steering axel (that's where the leak was). So I ended up using only two seals from the set bought at SLS in Germany.
http://sls.sparebase.de/bin/dbframes.phtml?mid=IN02

The seal set is located in frame 46c item 36, for EUR 32,60

Per G. Birkeland
69 280 sl aut 834
Norway