Author Topic: Distributor cap cover, and coil cap cover (Read 6712 times)

bjdg · « **on:** January 19, 2020, 08:09:19 »

Hey! New to the forum, looking for a 000 158 2085 distributor cap cover and a 000 158 1185 coil cover. just wondering if anyone has any spares left over. Even in poor shape is ok.

Thanks!

parklandmb · « **Reply #1 on:** January 27, 2020, 05:17:32 »

Hi there,
Try this site here.

http://type300.com/w114---w115.html

Have bought stuff there before.
He’s got the rarest parts you can imagine. Prompt and friendly service.

Good luck!
Sven

Jonny B · « **Reply #2 on:** January 27, 2020, 13:57:05 »

bjdg- welcome to the group (see this is post no 1) - what car do you have? The coil cover was not used on the 113 until late in the run of the 280 SL. It is almost at the end - the last issue of Pagoda has the full listing

The coil cover was used starting at VIN ending 22497
The distributor cover was used for cars with ignition suppression beginning at VIN ending 2663
Add to all cars starting at VIN ending 3113

The 300 site mentioned does have some rare stuff, they had a listing for the coil cover.

Pawel66 · « **Reply #3 on:** January 27, 2020, 15:54:38 »

Bjdg, if you still feel like buying the ignition coil cover, A 000 158 11 85, it is available at MB dealers, in my geography for about $65 + VAT.

Distributor cover is much more rare.

TJMart · « **Reply #4 on:** January 27, 2020, 20:27:07 »

I have a coil cover. PM me if you are interested.

Tony

dpreston Virginia · « **Reply #5 on:** January 28, 2020, 14:17:14 »

Do you mean Distributor cover?

Benz280 · « **Reply #6 on:** February 26, 2020, 14:07:36 »

Thanks all, the hunt continues..
Looks like these are in strong demand.

bjdg · « **Reply #7 on:** April 13, 2020, 15:22:52 »

Thanks all, still have not found one... But will keep looking.

David Robinson · « **Reply #8 on:** August 18, 2020, 16:31:21 »

Is this what you are looking for?

Benz280 · « **Reply #9 on:** August 18, 2020, 16:49:23 »

I did find on Ebay a few weeks ago, received and looks good.

David Robinson · « **Reply #10 on:** August 18, 2020, 17:36:55 »

Do you mind sharing the price as I have no idea of value?

Benz280 · « **Reply #11 on:** August 19, 2020, 01:37:28 »

Shipped from Canada, $130.00 ( was in good condition, not great condition).
It still surprises me as to how many cars are missing this cap, takes a total 90 seconds to re-install .

mrfatboy · « **Reply #12 on:** August 19, 2020, 02:38:34 »

Last year I got mine for $20 Shipped from Germany. However I had ship to family in Mallorca because seller would not ship to US.

Then another $20 to ship to me in San Diego.

Final $40

Garry · « **Reply #13 on:** August 19, 2020, 04:26:47 »

I guess a lot of Pagodas don’t have it as i believe they were only on the later cars from ‘69 built cars onwards.

RobSirg · « **Reply #14 on:** August 19, 2020, 13:38:38 »

...and I have talked to a few mechanics who, back in the day, simply didnt bother putting them back on. The push in pins can be hard to engage but not the most difficult thing to manage.
I guess they possibly forgot half the time after adjusting the points. Not too many original MB owners back in the day would bother looking under the hood after a service I gather.

Shvegel · « **Reply #15 on:** September 04, 2020, 12:17:08 »

If you have one that is scuffed up I refurbished mine by wet sanding it with 1000 grit paper and carefully hitting it with a heat gun to melt the surface a touch. I think the caps are another good example of a band-aid or progression repair. With the advent of Transistorized ignition the higher firing voltages available as well as more resistance in the wire set they most likely had arcing on the outside of the cap so they put a little rain hat on it to keep it dry. Within a couple years all Bosch 6 cylinder caps were of a larger diameter which spread the towers further apart. Problem solved.

bjdg · « **Reply #16 on:** September 27, 2020, 04:57:17 »

Quote from: David Robinson on August 18, 2020, 16:31:21

Is this what you are looking for?

Yes! That is what I am looking for!

mrfatboy · « **Reply #17 on:** September 27, 2020, 17:09:52 »

I just saw this on eBay. How bad do you want it? Pricey🤣🤣🤣😳

https://www.ebay.com/itm/254730852328

Shvegel · « **Reply #18 on:** October 04, 2020, 01:46:48 »

I have a plastic snap version I would part with. I have not examined it in a bit but remember it being in nice shape. PM me if interested.

News:

Author Topic: Distributor cap cover, and coil cap cover (Read 6712 times)

bjdg

bjdg

bjdg