Pagoda SL Group
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
This topic
This board
Entire forum
Google
News:
Purchase clothing, caps, jackets
with our official
Pagoda SL Group logo
from our official partner.
Home
Help
Technical Manual
Search
Login
Register
Pagoda SL Group
»
W113 Pagoda SL Group
»
Drive train, fuel, suspension, steering & brakes
»
Throw out/clutch bearing seal advice
« previous
next »
Print
Pages: [
1
]
Author
Topic: Throw out/clutch bearing seal advice (Read 1269 times)
swood1
Full Member
Senior
United Kingdom, England, Worcester
Posts: 247
Throw out/clutch bearing seal advice
«
on:
October 22, 2020, 14:02:26 »
Hi all
Can anyone advise easiest way of pushing the throw out bearing seal back in please? I'm worried about damaging the seal itself. Photo shoes old original seal in situ prior to me removing.
Regards
Steven
Logged
250 SL (early), in bits. Triumph TR4a
ja17
Full Member
Platinum
USA, OH, Blacklick
Posts: 7410
Re: Throw out/clutch bearing seal advice
«
Reply #1 on:
October 22, 2020, 14:27:00 »
Find a thin wall metal sleeve and press or drive it in. I found a hole saw just the right size, ground the teeth off smooth and used it to drive the seal in place.
Logged
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback
swood1
Full Member
Senior
United Kingdom, England, Worcester
Posts: 247
Re: Throw out/clutch bearing seal advice
«
Reply #2 on:
October 22, 2020, 14:29:01 »
Thanks for your feedback
I shall make a tool to push it in.
Regards
Steven
Logged
250 SL (early), in bits. Triumph TR4a
ja17
Full Member
Platinum
USA, OH, Blacklick
Posts: 7410
Re: Throw out/clutch bearing seal advice
«
Reply #3 on:
October 22, 2020, 14:30:57 »
Let us know how it goes!
Logged
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback
swood1
Full Member
Senior
United Kingdom, England, Worcester
Posts: 247
Re: Throw out/clutch bearing seal advice
«
Reply #4 on:
October 22, 2020, 15:31:42 »
Sorted it, thanks.
Fyi. Pipe/tool dims:-
OD. 34.90mm
ID. 31.40
Depth. 6.0
Logged
250 SL (early), in bits. Triumph TR4a
Print
Pages: [
1
]
« previous
next »
Pagoda SL Group
»
W113 Pagoda SL Group
»
Drive train, fuel, suspension, steering & brakes
»
Throw out/clutch bearing seal advice