Rocker springs and clearance from valve springs

[Pinder]

I took the valve cover off to inspect the top of the engine. I notice some value rocker springs in contact with valve  springs. Is this normal ? I moved the spring around the ball studs to move them away. It puts them a little off center. Is this anything needed to be addressed ? I would think the contact with the valve springs would cause I necessary chatter or noise.

[ja17]

Good to move them away from each other, but probably not causing noise. Check to make sure the camshaft is not too close to the valve cover hold-down metal straps. This can be a source of noise if they touch.

[Pinder]

Thanks Joe. Yes the hold down straps were rubbing the cam so i did bend them slightly to provide a clearance.