Door glass window holders on rolling mechanism

[lpeterssen]

Dear friends

Looking for the parts circled in red on the attached picture that allow to fix door glass windows to the manual rolling mechanism.

Many thanks
L.peterssen

[Pawel66]

The outside ones I see available at Mercedes
left A 113 720 01 47
right A 113 720 02 47

They are ca EUR 150 each.

But I cannot find the inner ones.... I will keep looking.

You will need the rubbers for them. There is a set at SLS, but those are easy to fabricate yourself.

What you will also need is 8pcs of rubber bushings, available at Mercedes, A 000 987 08 42, about  1EUR each.

[ja17]

I believe the ones used on the W107 cars will work fine.

[mrfatboy]

The 8 bushings can be created by slicing the desired thickness from the correct size rubber hose. 66nblue posted a thread on it here.

[Pawel66]

If you slice them from the hose, I would make sure to use a hose with as thin wall as possible. Thinner wall: more adjustment space.

[lpeterssen]

Many thanks Pawel

[lpeterssen]

Dear joe

I hope you are right because that will be the cheapest solution to use that part coming from a R107.

 Have been assembling this pagoda for years but as situation in Venezuela is very fragile I did no want to spend so much on it until we become free again and economy flourishes.

[Pawel66]

In SLS the 107 window rails are EUR 130 a piece. You would have to find them second hand I suppose.