Author Topic: Several questions on the trailing arms (Read 1879 times)

CJHenderson · « **on:** March 12, 2021, 13:05:34 »

I'm rebuilding the trailing arms and first question is the washer over the rubber bushing correct or does the edge needs to be pointing outward? Next, is the trailing arm for the driver side?

ja17 · « **Reply #1 on:** March 12, 2021, 13:53:45 »

Your question is a little confusing. The trailing arms are different and must be installed on the correct side. They point slightly inward when installed correctly and the "half crescent" metal ridge is also in-board when installed correctly.

CJHenderson · « **Reply #2 on:** March 12, 2021, 14:39:25 »

Thanks this is then for the left side.

ja17 · « **Reply #3 on:** March 12, 2021, 17:37:19 »

It is for the right side. Once you flip it over (installation orientation) the metal "C" is toward the inside.

stickandrudderman · « **Reply #4 on:** March 12, 2021, 17:42:56 »

And the bush is installed incorrectly.

CJHenderson · « **Reply #5 on:** March 12, 2021, 18:09:16 »

Thanks all

Pagoda SL Group

News:

Author Topic: Several questions on the trailing arms (Read 1879 times)

CJHenderson

Several questions on the trailing arms

ja17

Re: Several questions on the trailing arms

CJHenderson

Re: Several questions on the trailing arms

ja17

Re: Several questions on the trailing arms

stickandrudderman

Re: Several questions on the trailing arms

CJHenderson

Re: Several questions on the trailing arms