1969 280sl thermometer location

[edwardburak@erols.com]

1969 280sl USA version Automatic

I am getting ready to start my engine for the first time. I want the center instrument cluster installed for obvious reasons. I have already connected the oil pressure line to the engine and routed it into the dash. I know where the large electronic connector goes.

Where on the engine does the thermometer line bolt into? I have looked at my motor but cannot find it. the line seems long enough to reach to either side. I am aware of how fragile the line is. I will also bench test it with a heat gun before I install it.

If you could either tell me where or show me a picture, it would be greatly appreciated. Or any other tips to go along with it.
thanks for your help

[Pawel66]

On my engine (late 280Sl euro) it is as per the arrow.

[Leester]

And if you have the early version M130 engine with the "pod" the temperature sensor goes in the pod.

[edwardburak@erols.com]

I am unfamiliar with what 'pod' you are referring to. what is its purpose? Where on the motor is it?

[Pawel66]

This is where the thick coolant hose going to Injection Pump begins. The hose is reddish on the picture.

[edwardburak@erols.com]

Ok, I will check that when I get home tonight
thanks for your help

[Pawel66]

I marked the pod and the sensor on the picture.

[edwardburak@erols.com]

I found the location on my motor. Thanks for your help