Author Topic: Clutch for ZF 5 speed  (Read 1301 times)

Essjays

  • Full Member
  • Junior Level
  • *
  • Australia, New South Wales, Sydney
  • Posts: 10
Clutch for ZF 5 speed
« on: August 30, 2024, 06:07:23 »
Hi all. my car is getting a mechanical overhaul at the shop. May do the clutch at the same time, we're not sure yet. my car is a 5 speed 230. Does anyone know about differences with the clutch? Tried looking through the manuals
1966 230SL ZF 5-Speed
2020 GLC63S AMG

Benz Dr.

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7220
  • Benz Dr.
Re: Clutch for ZF 5 speed
« Reply #1 on: August 30, 2024, 06:27:40 »
No major differences. You will need to figure out which throw out bearing to use or use the same one that's on your transmission right now.
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

stickandrudderman

  • Vendor
  • Platinum
  • ******
  • United Kingdom, England, Richmond
  • Posts: 2926
    • http://www.colinferns.com
Re: Clutch for ZF 5 speed
« Reply #2 on: September 01, 2024, 19:23:59 »
Indeed, I went down this rabbit hole a while back but in the end found that the clutch is the same, just the thrust bearing can differ.

mauro12

  • Full Member
  • Gold
  • *****
  • Italy, Sicily, Messina
  • Posts: 643
Re: Clutch for ZF 5 speed
« Reply #3 on: November 05, 2024, 23:48:53 »
The pressure plate is the same between all manual transmissions but the 230-250 have the spring type and the 280 has a different type .
Mauro Pisani
250sl 1967 5speed zf manual

Taleb

  • Associate Member
  • Senior
  • ***
  • USA, NY, SPRINGFIELD GARDENS
  • Posts: 159
Re: Clutch for ZF 5 speed
« Reply #4 on: November 06, 2024, 14:28:54 »
safe your headache  and sale me your car ... :)