Drive shaft bolts

[mikeswplt]

Would appreciate any info on the bolts used to attach the drive shaft to the flange on the
rear end. I’ve been unable to locate the 4 bolts/nuts/washers that were removed when the 250SL I’m restoring was dismantled. The parts diagram doesn’t display them or reference any part number. A photo I saw online showed what looked like a nut retainer
as part of the connection.

[mikeswplt]

Talked to MB classic and bolts are listed as cheese head screw NLA. Nut retainer is lock plate, no washers required. Need to source a used set of bolts or find a suitable substitute.

[dirkbalter]

If you know what you need, you can it probably here:

https://belmetric.com/?gclid=EAIaIQobChMI2eSQl66j-AIVcyCtBh1gCwsoEAAYASAAEgKFUfD_BwE

[ja17]

I have plenty of good used bolts. They were used many of the common sedans of the era.

[mikeswplt]

Thanks for the offer Joe. I was able to get the bolts I needed off a 220S parts car at a local independent MB repair shop.