« previous next »
Pages: [1]

Author Topic: steering wheel swap  (Read 1593 times)

zak

  • Full Member
  • Silver
  • ****
  • USA, NJ, Bernardsville
  • Posts: 472
steering wheel swap
« on: July 14, 2022, 15:17:49 »
I located an original type ivory steering wheel for my late model 250 sl.
The ivory wheel came with the back hub.
Can I swap the steering wheel by just removing the nuts under the horn pad, or must the entire wheel/hub assembly be swapped out ?
thanks,

jz
Logged
1967 250 SL
1983 280 SL
2015 ML 250 Bluetec
2007 ML CDI
2004 E 320 Wagon
1999 E300 Turbodiesel

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: steering wheel swap
« Reply #1 on: July 14, 2022, 21:30:04 »
Just remove the 22mm nut. Pay attention to the alignment mark (slash) that it is pointing upward and wheels straight. Just slide the new one on.
Logged
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

Chris Long

  • Associate Member
  • Senior
  • ***
  • USA, NJ, Morristown
  • Posts: 175
Re: steering wheel swap
« Reply #2 on: July 17, 2022, 11:53:06 »
If you are just replacing the wheel you don’t need to remove the hub and can just remove the 5 bolts.
Logged
1970 280sl 4-Speed Horizon Blue

zak

  • Full Member
  • Silver
  • ****
  • USA, NJ, Bernardsville
  • Posts: 472
Re: steering wheel swap
« Reply #3 on: July 18, 2022, 21:33:44 »
Thanks gents, we removed the 22mm nut and replaced the wheel with it's hub. A simple job.
Even though the ivory wheel was original to the car, the car came to me with a black wheel.
Wow, what a difference the ivory wheel make to the interior. It brightens everything up in the cabin.

jz
Logged
1967 250 SL
1983 280 SL
2015 ML 250 Bluetec
2007 ML CDI
2004 E 320 Wagon
1999 E300 Turbodiesel
Pages: [1]
« previous next »